Spectre Simulator Fundamentals S3: Small-Signal Analyses Training
日期 | 版本 | 国家/地区 | 位置 | |
---|---|---|---|---|
Scheduled upon demandOn demand | EXPRESS INTERESTINQUIRE |
版本 | 区域 | |
---|---|---|
SPECTRE23.1 | Online | ENROLL |
SPECTRE21.1 | Online | ENROLL |
SPECTRE19.1 | Online | ENROLL |
Other Versions | Online | EXPRESS INTERESTINQUIRE |
Length: 1 Day (8 hours)
Become Cadence Certified
Course Description
For classroom delivery, this course is taught as a one-day session (8 hours).
This course is part of the Spectre® Simulator Fundamentals series. You use the Spectre Circuit Simulator and its corresponding options to analyze results from AC, transfer function (XF), Noise, Stability (STB), Loopfinder(LF), Pole-Zero (PZ), S-Parameter (SP), DC Match, AC Match, Fourier, Sensitivity and Sweep analyses. You use both the command line and ADE Explorer environments to set up and run simulations on circuit examples. All of the simulation results are analyzed and plotted using the Virtuoso® Visualization and Analysis tool.
Learning Objectives
After completing this course, you will be able to:
- Set up and run a family of small-signal and its associated analyses (AC, XF, Noise, S-Parameter, PZ, Loopfinder)
- Compute the loop gain, gain margin, and phase margin for a specific feedback loop or an active device while performing Stability analysis
- Measure the Fourier coefficients of two different signals at a specified fundamental frequency without loading the circuit while performing Fourier analysis
- Determine the sensitivity of output variables to input design parameters while performing Sensitivity analysis
- Compute the statistical deviation in the DC operating point of the circuit caused by device mismatch while performing a dcmatch analysis
- Compute the variations of AC responses due to statistical parameters defined in statistics blocks while performing an acmatch analysis
- Sweep a parameter processing a list of analyses (or multiple analyses) for each value of the parameter while performing sweep analysis
Software Used in This Course
- Spectre Classic Simulator
- Spectre Multimode Simulation
- Cadence Design Framework II
- Virtuoso Visualization and Analysis XL
- Virtuoso Schematic Editor L, XL
- Virtuoso ADE Explorer
Software Release(s)
SPECTRE23.1(ISR11) and IC23.1(ISR8)
Modules in this Course
- Small-Signal and Its Associated Analyses in Spectre
- Other Analyses in Spectre
- Appendix A: Spectre Command-Line Options (Optional)
- Appendix B: Specialized AC Analyses
- Appendix C: Using DFT in the Calculator
Audience
- Analog Designers
- Chip Designers
- RF Designers
- IC Designers
- Design Engineers
- Analog and Mixed-Signal IC Designers
Prerequisites
You must have:
- Basic knowledge of analog circuit design
- The ability to read and understand analog circuit netlists
Or you must have completed the following courses:
- Spectre Simulator Fundamentals S1: Spectre Basics
- Spectre Simulator Fundamentals S2: Large-Signal Analyses
Related Courses
Please see course learning maps at this link for a visual representation of courses and course relationships. Regional course catalogs may be viewed here.
Free Online Training Bytes (Videos)ONLINE TRAINING
Genus Synthesis Solution v16.1
This online class features the Cadence® Genus™ Synthesis Solution with next generation synthesis capabilities and how SoC design productivity gap is filled by Genus