Virtuoso Layout Pro: T7 Module Generator and Floorplanner Training
日期 | 版本 | 国家/地区 | 位置 | |
---|---|---|---|---|
Scheduled upon demandOn demand | EXPRESS INTERESTINQUIRE |
版本 | 区域 | |
---|---|---|
IC6.1.8/ICADVM20.1 | Online | ENROLL |
IC23.1 | Online | ENROLL |
Other Versions | Online | EXPRESS INTERESTINQUIRE |
Take the Accelerated Learning Path
Become Cadence Certified
Length: 1 Day (8 hours)
Course Description
In this course, you analyze the various methods to create a Modgen, modify the default Modgen settings, and route a Modgen using the Structured Router. You define the cell type attribute, configure the physical hierarchy, generate and place the blocks with the Floorplanner, edit Level-1 objects, use the Pin Optimizer, use the Pin Alignment, and create Feed Through Terminal Pins. You analyze the Modgen enhancements. You set up and run top-down floorplanning.
The following videos for this course include:
Channel: Virtuoso Floorplanner
Configuring the Physical Hierarchy
Generating the Physical Hierarchy
I/O Planning and Placement Using the I/O Placer
Placing the Blocks Using the Block Placer
Aligning the Soft Block Pins with the Top-Level Pins
Creating Feed Through Terminal Pins
Channel: Virtuoso Floorplanner – Soft Block Update Commands
How to Use Push Pre-Routes Command
How to Use Adjust Blocks Command
How to Use Remove Blocks Overlap Command
How to Use Snap Soft Blocks to Grid Command
How to Use Pull Soft Blocks Inside PR Boundary Command
How to Use Edit Soft Blocks Command
Learning Objectives
After completing this course, you will be able to:
- Set up and run Module Generator
- Set up and run Floorplanner
- Analyze Modgen Enhancements (Appendix)
- Set up and run Top-Down Floorplanning (Appendix)
Software Used in This Course
- Virtuoso Schematic Editor L
- Virtuoso Schematic Editor XL
- Virtuoso Layout Suite XL
- Virtuoso Layout Suite EXL
Software Release(s)
IC 23.1
Modules in this Course
- Module Generator
- Floorplanner
- Modgen Enhancements (Appendix)
- Top-Down Floorplanning (Appendix)
Audience
- Layout Design Engineers
- Layout CAD Managers
- IC Designers
- Analog/Mixed-Signal IC Designers
- Analog IC Designers
- Custom Circuit Designers
- Chip Designers
Prerequisites
You must have:
- Experience with layout design.
- Knowledge of schematic symbols and MOS devices.
- A basic knowledge of UNIX/Linux.
Or you must have completed the following courses:
- Virtuoso Layout Pro: T1 Environment and Basic Commands
- Virtuoso Layout Pro: T2 Create and Edit Commands
- Virtuoso Layout Pro: T3 Basic Commands
- Virtuoso Layout Pro: T4 Advanced Commands
- Virtuoso Layout Pro: T5 Interactive Routing
- Virtuoso Layout Pro: T6 Constraint-Driven Flow and Power Routing
Related Courses
- Virtuoso Layout Pro: T1 Environment and Basic Commands
- Virtuoso Layout Pro: T2 Create and Edit Commands
- Virtuoso Layout Pro: T3 Basic Commands
- Virtuoso Layout Pro: T4 Advanced Commands
- Virtuoso Layout Pro: T5 Interactive Routing
- Virtuoso Layout Pro: T6 Constraint-Driven Flow and Power Routing
- Virtuoso Layout Pro: T8 Virtuoso Concurrent Layout Editing
- Virtuoso Layout Pro: T9 Virtuoso Design Planner
Please see course learning maps at this link for a visual representation of courses and course relationships. Regional course catalogs may be viewed here.
Free Online Training Bytes (Videos)ONLINE TRAINING
Genus Synthesis Solution v16.1
This online class features the Cadence® Genus™ Synthesis Solution with next generation synthesis capabilities and how SoC design productivity gap is filled by Genus
"Excellent training."
Gregor Stadlober, Infineon Technologies
“Overall I found the Cadence Layout Pro courses useful and I learnt a few new functions.”-Online Course-
Elizabeth Hallworth, Power Integrations
"All expectations were met. The course is good and beneficial for all layouters."
Roberto Aberjido, Infineon Technologies
“Very profitable course with professional, competent trainer”
Daniel Neustifter, Infineon Technologies
"(...) instructor very competent and available to answer questions and/or analyse real layout examples."
Alberto Pedron, Infineon Technologies
"I liked that I learned the basic functionalities in Layout XL with very thorough examples. It was very helpful, I cleared some misunderstandings. The trainer was very good and gave us some useful tips."
Nikolaos Alexiou, Infineon Technologies
“Great trainer. (...) Very good atmosphere, good course; learned some new features and also old features that not have been used previously.”
Florian Dober, Infineon Technologies
"Very good course, short and a lot of information."
Guenter Holl, Infineon Technologies
"The training was helpful and beneficial for me in terms of the updates and advanced features of new Cadence versions."
Baby Aberjido, Infineon Technologies
"I really liked the teacher's skills."
Stefano Ruzzu, Infineon Technologies